Your present location:Home >> Bird Repeller >> GH-192 PIR bird repelelr

Product series

Tianfuan Industrial Area, 45 District, Baoan

Tel:0086-0755-23310826

Mobile phone :0086-13714784290

Fax:0086-0755-27579113

E-mail:sales_sam@126.com

Products in detail

  • Product name: GH-192 PIR bird repelelr
  • Product number: GH-192
  • Views : 753

PIR (Passive Infra Red) motion activated Animal Repeller provides a humanitarian way to repel unwelcome Animals, Bats and Birds from your garbage bins, fruit trees, lawn, garden, flower beds and fish ponds. It can be used both indoors and outdoor.


Installation:

  • Unlatch battery door on back of unit and remove battery compartment.

    Install 4 x AA alkaline batteries. SEE FIGURE 1

  • Put 2 screws on the wall .To place unit onto wall, push double wall mount hanging holes onto the screws. SEE FIGURE 2. For best detection; the unit should be positioned on the wall between 4.8 -14.2 feet above the ground.
  • Locate function switch on the front of the unit to select the Day Mode and Night Mode. SEE FIGURE 3



    Day Mold: Select the Day Mold, the unit working at the sound function only in day time. sound and flash light will working same time in night time ,

     

    Night Mold: Select the Night Mold, the unit will work in sound function only in day time and flash light will working only in night time.
    Note: If you are worried to make a noise to disturb people at night time, we suggest you select the Night Mode. FIGURE 4

    Avoid placing unit behind any large trees, wall or object


    Specification:
    1. Unit dimension:        W 12.5CM x D7.3CM x H 12.6CM
    2. Unit Weight:           220 grams
    3. Power Supply          4xAA alkaline batteries
    4. Power Consumption:    Standby current: 0.8 mA
    Working current: 22 mA
    5. Coverage:              10 meters, 70°


    Caution:
    ● Continuously use the Animal Repeller
    ● If storms are expected remove the unit from outdoor areas
    ● Turn off the unit if pets are playing around the protection area
    ● The unit must not to be immersed in water or any other liquid
    ● Do no cover PIR sensor lens
    ● If cleaning is required, dampen a soft cloth with mild soap water.
    Refrain from using any chemical or abrasive cleaning agents as this might damage the function of the unit.

  • Key words :